If you would like your house to be completely protected from the elements and also look stunning for a period of two decades or more an insulated Cullamix Tyrolean through-colored Monocouche render, or a fine layer system of paint is exactly what you want.

The products like Weber OCR, Weber Pral M or Weber Sil TF, Parex Revlane, Parex Monorex Parex Monogris E, Thin Coats offer the capability to select the colour and the finish of your render system, while also being economical and fast.

Render is the perfect solution for older and new houses offering both aesthetic and practical advantages.

Connect extensions seamlessly, secure against rain and wind and enjoy a stunning exterior that is colour to your choice. These are only a few of the reasons homeowners decide to make their homes.

Why Do We Render?

There are numerous reasons to make a building more attractive, however, the most important two reasons are to protect your property and for aesthetics.

The rendering protects all the outside of your structure with a specific material that is to last and secure.

This can be over a seal render system, or directly on the existing facade that is designed to protect against freezing temperatures and frost.

It can protect your home from weather elements and ensure that it will keep it in top condition. This is why rendering is as appropriate for modern homes as it is for older structures.

While there are real-world reasons to render buildings but it is also use utilize for aesthetic purposes as well.

The Weber Cullamix Tyrolean 25kg is available in a variety of shades and therefore it can be utilised to alter the appearance of the building. This is particularly useful for older homes that need a facelift.

For more information on rendering when it comes to construction work and the reasons why it’s important, read our article below.

This article will guide us through all the procedures to make a tyrolean rendering finish by using plaster.

What Is A Tyrolean Finish In The Plastering Industry?

Tyrolean finish can be describe as an exterior finish that’s name comes from the traditional mountain building process. It gives an age look to walls.

Tyrolean is a popular finish in the UK and comes in a variety of shades.

If properly applied the tyrolean finish will not crack unlike cement and plaster finishes.

Tyrolean finishes are resistant to snow and rain and offer some insulation for the temperature as well as sound.

Cullamix Tyrolean problems finish is applied over an unpainted wall.

If a tyrolean coating is want over the block work or brick wall, render should be first applie and to cure for at least 4 days before applying the tyrolean coat.

Tools Required To Apply Tyrolean Finish To Rendering

Tyrolean finish is available as a dry mix that requires only water to be prepare for application.

The most important tool to use for tyrolean work can be in the ticker guns hand tool. These can be purchase from many retailers for builders or big DIY stores.

You can also lease these from rental stores, or from the major builders’ merchants. You can also purchase them online through websites like Amazon.

The rental of a tyrolean flicker gun will cost approximately PS25.00 each day (as as of December 2017) you will have to make an upfront fee for the device. You can purchase the tyrolean flicker guns from Amazon at around PS 55.00 (as as of Dec. 2017).

The tool consists of the reservoir and a hand crank that is attach to a spindle that has wires that resemble combs, and a tension bar to alter the amount of the splatter.

Apart from using the flicker gun the sole equipment needed for applying the tyrolean coating are a bucket, an ax or a stick to mix and when necessary the scaffold or ladder.

• This tool utilises cables to scoop up the material, then flick it into tiny splotches over the wall.
• There is the option to use the tool on a weekly or daily basis but the tool itself isn’t too expensive to buy.
• Tyrolean finishing is applied with thin layers. It usually requires four to six coats.
• Tyrolean mixtures should have the consistency of a slurry that is thin enough to flick, but not so thick that it will fall off of the walls.
• The tyrolean solution is best put in a bucket and stored close to the place for refilling using the tool known as the flicker gun.
• It is vital to mix before refilling the tool.
• It is beneficial to put around the same amount into the tool every time to ensure that the application is running in a consistent manner.

How To Apply The Tyrolean Finish To Plastering / Rendering

Once the wall has be clean and prepare by cleaning and repair of all cracks and holes, the Tyrolean mix is on the walls.

When keeping the tool in line with the wall and about 250 millimeters from the wall, turn the crank using the same speed and continue to work at a steady pace across the wall.

To ensure that the layer is at a uniform thickness, hold the gun in the exact angle. move it at an even speed, and move on the crank with a constant speed.

Insulated Renders

Once the rendering insulation boards are in the correct position, (Also known as EWI external Wall Insulation)

A Cullamix Tyrolean finish (Parex Maite) is applied with an acrylic mesh to prevent the boards from cracking due to any movement within the stress or building and then prepared for the desired finish you want to apply.

It can be a scratch-finish (Monorex EHI) or a Thin Coat Finish (Parex Revlane /WebersilTF), but still delivering results that are as secure as renders with multiple coats.

Banish Pebbledash

Pebbledash use to be an extremely popular choice for adding on the outside of homes; however, it’s go of style in recent years.

Even though it protects however, the pebbles also tend to fall out, and the look gets shabby. Some homeowners think it can make their home look older, or outdated – and not in a charming manner.

The removal of the pebbledash could make you think of how your house should appear. A render such as Monocouche (One Coat) can be use on top of pebbledash, concealing any flaws and giving your home a perfect and smooth exterior.

A good way to apply is to start from the bottom left up to the right and then down, and then return towards the left.

Although fatigue in the arms is a problem with hand cranks it is essential to work on a damp edge. If the edge dry there is a visible line that could appear in the Cellecta screedboard 28.

It’s a good idea to first practice in case you are making your first try with the Tyrolean flicker tool.

After the first layer starts to become set, apply the next layer. Repeat this process until there are at least 4-6 thin coats.

If you’re looking to compare prices for plastering work, you could utilise our free quotes from tradesmen comparison service to match you with local tradespeople and plasterers close to you.

Just fill out the form to post your job to begin, with no obligation. We’ll complete the rest.

The Tyrolean Blend (Mixture Ratio And Ingredients)

The mix use for this kind of rendering is typically compose of cement, lime water, and sand. The mix’s ratio can be as follows: 1 (cement) 2 (sand) 1. (lime).

If you are making a mix, ensure that the water you use is clear and you gradually add it so that you can create the proper consistency. Also, don’t over-exaggerate the proportion of water, and you’ll result in the mixture becoming runny too early.

Tyrolean Render Colours

The number of colours offered for this particular decorative finishing item will differ with the manufacturer that you go to, e.g. weber paint comes in six colours (cream ivory, white, silver, parchment, white and grey).